Flowserve PMV D3 Digital Positioner - Manual (Page 14)

14
7. Control
Menus and pushbuttons
The positioner is controlled using the five
pushbuttons and the display, which are
accessible when the aluminium cover is
removed.
For normal functioning, the display
shows the current value. Press the ESC
button for two seconds to display the main
menu.
Use the pushbuttons to browse
through the main menu and the sub-menus.
The main menu is divided up into a basic
menu and a full menu, see page 16.
Other functions
ESC
Exit the menu without making any changes
(as long as any changes have not been
confirmed with OK).
FUNC
To select function and change parameters.
OK
To confirm selection or change of para-
meters.
MENU INDICATOR
Displays the position of the current menu
row in the menu.
ESC FUNC
OK
BASIC MENU
MAN/AUTO OUT OF SERVICE
MANUAL
UNPROTECTED
IN SERVICE
The positioner is following the input sig-
nal. This is the normal status when the posi-
tioner is working.
OUT OF SERVICE
The positioner is not following the input
signal. Critical parameters can be changed.
MANUAL
The positioner can be adjusted manually
using the pushbuttons. See section ”Man/
Auto”, page 21”.
UNPROTECTED
Most of the parameters can be changed
when the positioner is in the ”Unprotected”
position. However, critical parameters are
locked when the positioner is in the ”In ser-
vice” position.