Flowserve CB 1 - Manual (Page 20)

20
We hereby declare that the pressure equipment CB 1... and CB 2... conform to the following European
Directive:
■ EC Pressure Equipment Directive (PED) No. 97/23 of 29 May 1997
Swing flap non-return valves are pressure equipment as defined in article 1, section 2.1.4 of the PED.
Applied conformity assessment procedure as described in Annex III for CB 24 and
CB 24 S: Module A1
Applied conformity assessment procedure as described in Annex III for CB 26 and
CB 26 A: Module H - verified by the Notified Body (Registration No.0525).
This declaration is no longer valid if modifications are made to the equipment without consultation
with us.
Declaration of Conformity
Bremen, 15 th April 2002
GESTRA GmbH
Annex
Quality Assurance Representative
Lars Bohl
Head of the Design Dept.
Uwe Bledschun
Academically qualified engineer