Flowserve Valtek MaxFlo 3 - Manual (Page 16)

®
User instructions - MaxFlo 3 - VLENIM0052-02 02.07
6
Flowserve Corporation
Flow Control
350 N. Mt. Springs Parkway
Springville, UT 84663
USA
Phone: 80 489 86
Fax: 80 489 379
Flowserve S.A.S.
, avenue du Quebec
B.P. 645
9965 Courtaboeuf Cedex
France
Phone: 33 (0)  60 9 3 5
Fax: 33 (0)  60 9 3 99
Flowserve Pte Ltd.
 Tuas Avenue 0
Singapore 63884
Singapore
Phone: 65 6868 4600
Fax: 65 686 4940
Flowserve Australia Pty Ltd.
4 Dalmore Drive
Scoresby, Victoria 379
Australia
Phone: 6 7 3686866
Fax: 6 7 3685466
Flowserve Ltda.
Rua Tocantins, 8
São Caetano do Sul, SP 09580-30
Brazil
Phone: 55  69 6300
Fax: 55  69 633
FCD VLAIM0052-01 – 02/07 (Replaces VLAIM052-00)
Flowserve Corporation has established industry leadership in the design and manufacture of its products. When properly selected, this Flowserve product is designed to
perform its intended function safely during its useful life. However, the purchaser or user of Flowserve products should be aware that Flowserve products might be used in
numerous applications under a wide variety of industrial service conditions. Although Flowserve can (and often does) provide general guidelines, it cannot provide specific data
and warnings for all possible applications. The purchaser/user must therefore assume the ultimate responsibility for the proper sizing and selection, installation, operation, and
maintenance of Flowserve products. The purchaser/user should read and understand the Installation Operation Maintenance (IOM) instructions included with the product, and
train its employees and contractors in the safe use of Flowserve products in connection with the specific application.
While the information and specifications contained in this literature are believed to be accurate, they are supplied for informative purposes only and should not be considered
certified or as a guarantee of satisfactory results by reliance thereon. Nothing contained herein is to be construed as a warranty or guarantee, express or implied, regarding any
matter with respect to this product. Because Flowserve is continually improving and upgrading its product design, the specifications, dimensions and information contained
herein are subject to change without notice. Should any question arise concerning these provisions, the purchaser/user should contact Flowserve Corporation at any one of its
worldwide operations or offices.
© 006 Flowserve Corporation, Irving, Texas, USA. Flowserve is a registered trademark of Flowserve Corporation.
To find your local Flowserve representative please use the
Sales Support Locator System found at:
www.flowserve.com/contact.htm
or call USA 80 489-86