Flowserve BA46 - Manual (Page 6)

6
Explanatory Notes
Scope of supply
BA 46
 Continuous blowdown valve BA 46
 Sample valve (not mounted)
 Gasket A7 x 3 x .5
 Installation manual
BA 47
 Continuous blowdown valve BA 47
 Sample valve (not mounted)
 Gasket A7 x 3 x .5
 Installation manual
Retrofitting kit for BA 46, BA 47
 Electric actuator
EF 0.5, EF , EF - or EF -40
 Mounting kit for coupling / mounting bracket
 Installation manual for ARIS actuator EF...
Spare parts
 Kit according to spare parts list, page 33
PED (Pressure Equipment Directive)
The equipment meets the requirements of the Pressure Equipment Directive 97/3/EC.
Application in fluids of group . With CE marking, except equipment according to section 3.3.
Important Notes
– continued –
Attention
The name plate specifies the technical features of the equipment. Note that any piece of
equipment without its specific name plate must neither be commissioned nor operated.
ATEX ( Atmosphère Explosible)
The valves BA 46, BA 47 can be used in potentially explosive areas, provided that the following notes
are observed:
The operating fluid must not generate excessively high temperatures. Electrostatic charges that may
be generated during operation must be discharged. Make sure that the stuffing box is tight and that
the valve spindle can run smoothly. The equipment can be used in Ex zones , , ,  (999/9/EC)
II  G/D c X.
According to the European Directive 94/9/EC the valves BAE 46, BAE 47 must not be used in
potentially explosive areas. For more information refer to our ATEX Declaration of Conformity.
BAE 46
 Continuous blowdown valve BAE 46
 Sample valve (not mounted)
 Gasket A7 x 3 x .5
 Installation manual
 Installation manual of the ARIS actuator EF...
 Declaration of manufacturer
BAE 47
 Continuous blowdown valve BAE 47
 Sample valve (not mounted)
 Gasket A7 x 3 x .5
 Installation manual
 Installation manual for ARIS actuator EF...
 Declaration of manufacturer