Fluke Biomedical 76-419-4150 User Manual
Page 13
Operation
§1020.33 Computed Tomography (CT) Equipment
2
2-7
J.
CT Number Mean and Standard Deviation
1) A method shall be provided to calculate the mean and standard deviation of CT numbers for an array of
picture elements about any location in the image. The number of elements in this array shall be under user
control.
2) The manufacturer shall provide specific instructions concerning the use of the method provided for
calculation of CT number mean and standard deviation in addition to other information provided according to
§ 1020.30(h).
(
The information collection requirements in paragraphs (c), (d), (g), and (j) were approved by the Office of
Management and Budget under control number 0910-0025)
[49 FR 34712, Aug. 31, 1984; 49 37381, Sept. 24, 1984, as amended at 49 FR 47388, Dec. 4, 1984; 56 FR 36098. Aug.
1,1991]