Fluke Biomedical ProSim 4 Getting Started - Manual (Page 14)

ProSim™ 4
Getting Started
2
Safety Information
In this manual, a Warning identifies hazardous conditions
and actions that could cause bodily harm or death. A
Caution identifies conditions and actions that could
damage the Analyzer, the equipment under test, or cause
permanent loss of data.
 Warnings
To prevent personal injury, use the Product
only as specified, or the protection supplied
by the Product can be compromised.
To prevent possible electrical shock, fire, or
personal injury:
• Do not use and disable the
Product if it is damaged.
• The battery door must be closed
and locked before you operate
the Product.
• Remove all probes, test leads,
and accessories that are not
necessary for the measurement.
• Do not use the Product around
explosive gas, vapor, or in damp
or wet environments.
• Do not use the Product if it
operates incorrectly.
• Do not connect the Product to a
patient or equipment connected
to a patient. The Product is
intended for equipment
evaluation only and should never
be used in diagnostics, treatment,
or any other capacity where the
Product would come in contact
with a patient.
• Read all safety Information before
you use the Product.
• Examine the case before you use
the Product. Look for cracks or
missing plastic. Carefully look at
the insulation around the
terminals.
• Carefully read all instructions.