Formax FD 320 - Manual (Page 7)

5
TROUBLESHOOTING
PROBLEM: POSSIBLE CAUSE: SOLUTION:
Folder will not start Machine not plugged into an
active wall outlet
Plug machine into an active outlet
Speed control not turned on Turn speed control on
Fuse blown Replace blown fuse
Fold plate not inserted Insert fold plate
Paper will not feed Paper guides too tight Adjust the paper guides so a single
sheet of paper slides freely between
the guides without excessive play
Improper stacking Stacking wheels improperly set Realign the stacker wheels
Skewed folds Excessive side play between
paper guides and paper edges
Adjust paper guides and skew adjust
Paper not square Readjust the paper in the infeed tray
Infeed table not square Adjust table by turning the skew ad-
just knob back and fourth until skew
is eliminated