Formax FD 8804 - Manual (Page 8)

5
Machine characteristics
Machine designation: conveyor-belt paper shredder
Machine type: FD 8804CC, FD 8804SC
Total machine weight: 661 lbs.
Technical equipment: large feeding table, inlet conveyor belt
Cutting Data, Speed, Dimensions, Weight
Cutting Style: Cross Cut Strip Cut
Shred Size: 1/4” x 2” 1/2”
Sheet Capacity: 75 to 90 105 to 125
Speed: Up to 40 feet per minute Up to 50 feet per minute
Feed Opening: 16” 16”
Dimensions: 31” W x 54” D x 43 1/2” H 29” W x 53” D x 50 1/2” H
Feed Table Dimensions: 26” W x 16” D x 37 1/2” H 28 1/4” W x 16” D x 41 1/2” H
Space Requirements: 34” W x 57” L x 52” H 32” W x 55” L x 59” H
Waste Bin Capacity: 36 gal. 49 gal.
Weight: 661 lbs. 661 lbs.
FD 8804CC
Motor Specifications, Power Requirements
Installation
1. Appropriate power outlet must be available at installation site.
2. The FD 8804 is delivered completely assembled (although it can be
delivered in parts, if necessary.) During transport, be aware of the
shredder’s high center of gravity.
3. The shredder can be moved on its casters. If a fork-lift is used to transport
the machine, be sure to use the designated pick-up points.
4. Install the shredder on a flat and even floor without carpeting.
5. Once the shredder is in place, lock the caster brakes, and plug in power
cable to appropriate power source.
Power Plug
Power Outlet
Motor Type Horizontal Geared
Rated Power 8HP
Operating Voltage 220V
Phase 3-Phase
Frequency 50/60Hz
Rated Current 20A
Output RPM 25 RPM
Number of Poles 4 (3 hot & 1 ground)
Total Rated Power Pn 1.5KW
Total Rated Current In 20A
Total EOCR Protection 25A
FD 8804SC