Description, Specifications – Formax FD 4400 User Manual
Page 5
Operator Side
Pump On/Off Switch
Air-Feed Table
Control Panels
Non-operator Side
FUNCTION
CUT-SHEET BURSTER
The FD 4400 High-Volume Cut-Sheet Burster is specifi cally designed to process Check21 IRD’s and other
documents printed on perforated cut sheets. This machine sets the benchmark as the only high volume
cut-sheet burster capable of processing up to 30,000 forms per hour and up to one million (input) per month.
A bottom-feed air system is utilized to allow operators to continually load forms to maximize effi ciency and
throughput.
CONVEYOR SEQUENCE STACKER W/ PHOTOEYE
The Conveyor Sequence Stacker w/ photoeye allows continuous runs of forms without stopping the burster to
unload stacker. Conveyor belts carry forms from the burster output onto a catch grill where they are partially
stacked for removal.
DESCRIPTION
1
POWER DROP STACKER
The optional Power Drop Stacker collects forms in one neat stack without need for operator intervention at
outfeed end of the machine during processing of each box of forms. The power drop stacker has automatic
shut-off, which can be pre-set.
Processing speed:
Variable, up to 30,000/hour (11”)
Feed table capacity:
Up to 500 sheets of 20# paper
Monthly duty cycle
Up to 1,666,667 forms per month (input)
Paper size:
Min: 4” W x 5.5” L - Max:14” W x 20” L
Power requirements:
110 V 50/60 Hz 20 Amp dedicated line required
Dimensions:
42” H x 33” W x 64.5” - 72” L
Weight:
Approx. 500 lbs.
SPECIFICATIONS