Formax FD 230 - Manual (Page 9)

6. To perform a control upstroke, close the upper cover
and power on the machine.
7. Press the “Move” icon on the Main screen (fig 2) and
the following menu comes up – “Manual Control” (fig
3).
8. From the “Manual control” screen press the “1 turn“
icon (fig 3) and the control upstroke will be carried
out.
9. With the control upstroke completed, power off the
machine and unplug it. Then completely tighten the
hexagonal screws with the tool provided to secure the
blade in position.
6. Finally, lower the pressing mechanism to its original
position and replace the locking screws.
CHANGING BETWEEN CREASING AND PERFORATING KNIFES - Continued
FORMAX
Fig. 2: Main Screen
Fig. 3: Manual control
5