Formax FD 260-20 - Manual (Page 16)

12
5. OPERATION
1. Position the FD 260-20 in-line with other mail
processing equipment.
2. Turn POWER SWITCH on. (Refer to Figure 5.1.)
NOTE
Turn on the FD 260-20 before turning on any other
machines. If you process mail pieces before
turning the FD 260-20 on, those mail piece will not
stack properly.
3. Adjust the speed of the TRANSPORT BELTS using the
SPEED CONTROL KNOB. (Refer to Figure 5.1.)
Turn the knob toward FAST to increase the speed, or
counterclockwise to decrease the speed. Turning this
knob counterclockwise as far as it will go stops the
TRANSPORT BELTS.
Figure 5.1 -- Adjusting Speed
4. Process several mail pieces and temporarily adjust the
FD 260-20’s speed so it runs slightly slower than the
other processing machines.