Formax Roller Cleaning Kit Instructions - Manual

Formax Cleaning Kit
Includes:
(1) Can Formax Rubber Roller Cleaner
(10) Cotton Cloths
Pressure Seal (FD1500, FD2002, FD2032, FD2054):
1. Make sure machine is turned off and unplugged. Lift up top cover and remove upper fold plate. All pressure seal
equipment has four (4) black rubber fold rollers and two (2) steel rollers.
2. Using Formax roller cleaner, spray a new cotton cloth until the cloth is saturated. Wipe the wet cloth in a back and
forth motion making sure to clean the entire surface of the fold and seal rollers. Now take a dry cloth and wipe off
excess toner. The cloth should be covered with black toner surplus from cleaning the rollers.
3. Make sure to run 10-15 sheets of blank copy paper to ensure all cleaner has been removed from the fold rollers.
Running blank sheets will remove any excess residue of cleaner on the rollers.
Folders (FD320, FD342, FD382, FD 38X):
1. Make sure machine is turned off and unplugged. All folders have four (4) rubber rollers (FIG A).
2 Remove and unplug (if FD382/FD38X) the upper and lower fold plates (FIG B).
3. Using Formax roller cleaner, spray a new cotton cloth until the cloth is saturated. Wipe the wet cloth in a back and
forth motion making sure to clean the entire surface of the fold and seal rollers. Now take a dry cloth and wipe off
excess toner. The cloth should be covered with black toner surplus from cleaning the rollers.
4. Make sure to run 10-15 sheets of blank copy paper to ensure all cleaner has been removed from the fold rollers.
Running blank sheets will remove any excess residue of cleaner on the rollers.
Fold Rollers
Seal Rollers
Fold Rollers
Upper Fold
Plate
Lower Fold
Plate
FIG A FIG B