Foxconn AT-5250 - Manual (Page 12)

16 17
BIOS SETUP BIOS SETUP
no password is set or you enter system with administrator password, this item will display
“Administrator”.
Advanced
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Main Advanced Power Security BootOptions Save & Exit
▶ Miscellaneous
▶ Integrated Periperals
▶ SATA configuration
→ ←: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt
F7: Load User-defined Defaults
F8: Save as User-defined
F9: Optimized Defaults
(When Access Level is
Administrator)
F10: Save & Exit
ESC: Exit
Miscellaneous
Advanced
► Miscellaneous/Integrated Periperals/SATA configuration
Press<Enter>to go to relative submenu.
Miscellaneous
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Main Advanced Power Security BootOptions Save & Exit
Bootup Num-Lock [off]
Intel IGD Configuration
IGFX-Boot Type [CRT+HDMI]
High Precision Event Timer Configuration
High Precision Timer [Enabled]
→ ←: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt
F7: Load User-defined Defaults
F8: Save as User-defined
F9: Optimized Defaults
(When Access Level is
Administrator)
F10: Save & Exit
ESC: Exit
Select the keyboard NumLock
state
Advanced
► Bootup Num-Lock
This item defines if the keyboard Num Lock key is active when your system is started. The available
settings are: On and Off (default).
► IGFX-Boot Type
This item is used to select Onboard Graphic output screen. Available value:[CRT] or [HDMI] or
[CRT+HDMI].
► High Precision Timer
This item is used to enable or disable the high precision timer.