Foxconn R10-H1 - Manual (Page 44)

37
3
Health
► CPU Temperature
These items show the current CPU temperature detected automatically by the system.
► System Temperature
These items show the current System temperature detected automatically by the system.
► System Fan Speed
This item shows the current System Fan speed detected automatically by the system.
► CPU Fan Speed
This item shows the current CPU Fan speed detected automatically by the system.
► CPU Vcore/DRAM Voltage/+12V SYS/+5V SYS/VBAT
These items show the Current CPU Vcore/DRAM Voltage/+12V SYS/+5V SYS/VBAT Voltage
detected automatically by the system.
► Smart Fan Function
This option is used to enable or disable smart fan function. Default value is [Disabled]. Only
when this option is enabled, you can set some correlative parameters. "Smart Fan Automatic
Mode" is the principle figure of CPU smart fan function for your reference.
CPU Temperature : +18 C
System Temperature : +29 C
System Fan Speed : N/A
CPU Fan Speed : 2566 RPM
CPU Vcore : +0.972 V
DRAM Voltage : +1.560 V
+12V SYS : +12.384 V
+5V SYS : +3.002 V
VBAT : +3.120 V
Smart Fan Function [Disabled]
Version 2.02.1205. Copyright (C) 2010 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enable/Disable Smart Fan
Function
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
Main Advanced Chipset Boot Power Health Security Save & Exit Health