Foxconn IGPSK7MA-ERS - Manual (Page 20)

Chapter 2 Installation Instructions
13
Line-in jack, Line-out jack, Microphone jack
When using a two-channel sound source, the Line-out jack is used to connect
to speaker or headphone; the Line-in port connects to an external CD player,
tape player or other audio device. The Microphone jack is used to connect to the
microphone.
When using a 6-Channel sound source, connect the front speaker to the green
audio output; connect the surround sound speaker to the blue audio output;
connect the center speaker/subwoofer to the red Microphone outputput, as shown in
the following figure:
Line-out
Line-in
Microphone
8
9 1394 Port (optional)
This digital interface supports electronic devices such as digital cameras,
scanners, and printers.
Front Left Front Right
Rear Left Rear Right
Subwoofer
Center
Blue
Green
Red
ＩＧＰＳＫ７ＭＡ－ｍａｎｕａｌ－Ｖ１．０－１１－１３－０４．ｐ６５ 2004-11-15, 17:36 13