Denon DN-720R - Manual (Page 8)

PLAYBACK
• Switch on your amplifier or receiver.
• Set the TAPE MONITOR switch on your amplifier or receiver to the TAPE position.
• Operate the deck in numerical order as illustrated below:
RECORDING
►
PLAY
(PLAY Push the PLAY button (The PLAY indicator will light up).
• When playback is finished, press the stop button.
• To restart the tape, press the PLAY button.
• If different types of Dolby Noise Reduction are used for record and
playback, playback response will be adversely effected.
• Switch on the source component (tuner, amplifier, etc.).
• Set the TAPE MONITOR switch on your amplifier or receiver to the SOURCE position.
8
PHONES
Playback sound is fed into the headphones set.
POWER
Push the switch to turn "ON" the power.
EJECT Press the EJECT button to open the cassette compartment.
Cassette Compartment Cover
Load the cassette tape.
DOLBY NR
For recordings made without Dolby NR, set to "OFF".
For recordings made with Dolby B NR, set to "B".
(The B-NR indicator will light up.)
For recordings made with Dolby C NR, set to "C".
(The C-NR indicator will light up.)