Foxconn D42S - Manual (Page 24)

17
3
System Information
This submenu is used to set up the standard BIOS features, such as the date, time, IDE channel
and so on. Use the arrow up/down keys to select an item, then use the <+> or <-> keys to change
the setting.
► System Time
This item allows you to configure the desired time. Use [ENTER] to enter the setting, then use
[TAB] to move forward a field. Use [+] or [-] to input the value.
The three fields of the setting are <hour> : <minute> : <second> respectively.
► System Date
<weekday><month><date> <year> format.
Day—weekday from Sun. to Sat., this message is automatically displayed by BIOS (Read
Only).
Month—month from 1 to 12.
Date—date from 1 to 31.
Year—year, set up by users.
Use [ENTER], [TAB] or [SHIFT-TAB] to select a field. Use [+] or [-] to input the value.
► SATA Channel 1 /SATA Channel � SATA Channel 2
While entering setup, BIOS automatically detects the presence of SATA devices. This item
displays the drive information of SATA devices.
► Halt On
This category determines whether or not the computer will stop if an error is detected during
powering up.
[All Errors] : All errors can result in system halt.
[All Errors But...] : All errors but keyboard or mouse can result in system halt. The halt condi-
tion can be enabled/disabled in the next two settings.
► Keyboard
CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc.
System Information
System Time [17 : 33 : 49] Help Item
System Date [Tue 10/20/2009]
Use [Enter], [TAB]
► SATA Channel 1 [Not Detected] or [SHIFT-TAB] to or [SHIFT-TAB] to
► SATA Channel 2 [Not Detected] select a field.
Halt On [All Errors, But ...] Use [+] or [-] to Use [+] or [-] to
Keyboard [Disabled] change system time.
Mouse [Disabled]
Model Name :D52S/D42S
BIOS Version :P01
Memory :1024MB
MAC Address :00-00-00-00-00-30
Genuine Intel(R) CPU @ 1.66GHz
↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help
F9:Optimized Defaults
17