Foxconn D42S - Manual (Page 30)

23
3
Smart bIoS
► Smart Power LED
Smart Power LED is a feature built on your motherboard to indicate different states during
Power-On Self-Test (POST). The LED is located at the front panel, and it displays POST state
by different long-short blinking intervals. You can always leave this state enabled.
► Smart Boot Menu
�hen PC starts, it will ask you to press [Del] key to enter setup or press [Esc] key to enter
smart boot menu. If [Disabled] is selected, then pressing [Esc] has no function. This also
prevents user without password trying to get into your computer through smart boot menu.
► Current CPU Speed
This item displays the current CPU speed.
► Current FSB Speed
This item displays the current Front Side Bus clock.
► Current CPU Multiplier
This item displays the current CPU Ratio.
► Current DRAM Speed
This item displays the current DRAM Speed.
CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc.
Smart BIOS
Smart Power LED [Enabled] Help Item [Enabled] Help Item Help Item
Smart Boot Menu [Enabled] [Enabled]
Current CPU Speed : 1.66GHz 1.66GHz 1.66GHz
Current FSB Speed : 666MHz
Current CPU Multiplier : 10 Disabled Disabled
Current DRAM Speed : 800MHz Enabled
↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help
F9:Optimized Defaults
Options
[Enabled]
System Status Power LED Status Stop Blinking Condition
Normal Always On Always On
No Memory Continue blinking On (1sec.), Off (1sec.) Reboot .. Memory OK
No Display Continue blinking On (2sec.), Off (2sec.) Reboot .. Display OK
Post Error Message
Quick blinking twice (1/3sec. On, 1/3sec. Off),
one long On (1sec.), continuously.
Enter Setup or Skip