Foxconn G31MG Series - Manual (Page 39)

32
3
as needed for running graphics applications. If a user is not performing any graphics-intensive
operations, most of the DVMT memory can be utilized by the OS for other uses. We recommend
using DVMT setting for better overall system performance.
► DVMT/FIXED Memory Size
Select graphics memory size for Fixed or DVMT usage.
► Init Display First
Select PCI-Express graphics card as the default first display device.
This option is used to select the source of primary display device. It can be onboard display or
PCI-Express graphics card. Select Auto then if no PCI-E graphics card is installed, onboard
VGA will be used.
**PCI express Relative Items**
► PCI Express x1 Port
This item is used to enable/disable PCI Express x1 port, or let it be auto-detected.
► PCI-E Compliancy Mode
This item is used to set the PCI-E compliancy mode. Setting options: [v1.0a]; [v1.0].
► Maximum Payload Size
This item is used to set maximum Transaction Layer Packets (TLP) payload size for PCI
Express devices. The unit is byte.