2 bios configuration, 3 create raid in bios – Foxconn Avenger User Manual
Page 85
78
5
5-2 BIOS Configuration
1. Enter the BIOS setup by pressing <DEL> key during the POST(Power On Self Test).
2. Select the “Integrated Peripherals” from the “Main menu”, then select the
“OnChip
ATA Device” item and press <Enter> to go to the configuration items.
3. Select and Set the “SATA Mode” option to �RAID��.
4. Press <F10> to save the setting then PC will reboot itself.
5-3 Create RAID in bIos
Enter RAID bIos setup
When BIOS is restarted, it will display a message asking you to press <Ctrl>+<I> keys
simultaneously to enter the main menu of Intel
®
Matrix Storage Manager Option ROM
Utility. Press the <Ctrl>+<I> to enter Configuration Utility.
Intel(R) Matrix Storage Manager option ROM v5.0.0.1011 ICH9R wRAID5
Copyright(C) 2003-04 Intel Corporation All Rights Reserved.
1. Create RAID Volume
3. Reset Disks to Non-RAID
2. Delete RAID Volume
4. Exit
RAID Volume :
� = Data is Encrypted
None Defined.
Physical Disks:
Port Drive Model
Serial #
Si�e
Type/Status(Vol ID)
0
WDC WD2500JS-60N WD-WCANKC865380 232.9GB
Non-RAID Disk
2
Maxtor 6L250S0
L50SKP4G
232.9GB
Non-RAID Disk
4
ST3320620SV
9QF4YJGQ
298.1GB
Non-RAID Disk
5
ST3300831AS
3NF02XH2
279.5GB
Non-RAID Disk
[↑↓]-Select [ESC]-Exit [ENTER]-Select Menu
Intel(R) Matrix Storage Manager option ROM v8.5.0.1013 ICH10R wRAID5
Copyright(C) 2003-08 Intel Corporation. All Rights Reserved.
�
DISK/VOLUME INFORMATION
��
�
MAIN MENU
��
1. Create RAID Volume
Phoenix - AwardBIOS CMOS Setup Utility
OnChip IDE Device
SATA Mode
RAID
Item Help
LEGACY Mode Support
Disabled
x Turbo Memory Support
Disabled
Menu Level ►
OnBoard IDE and eSATA Chip
IDE Mode
↑↓��������:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values
F7:Optimized Defaults
RAID