Foxconn NF4SLI7AA-8EKRS2 - Manual (Page 28)

21
Chapter 2 Installation Instructions
Installing an expansion card
1. Before installing the expansion card, read the documentation that came with
it and make the necessary hardware settings for the card.
2. Make sure to unplug the power cord before adding or removing expansion
cards.
3. Align the card connector with the slot and press firmly until the card is
completely seated on the slot.
4. Secure the card to the chassis with the screw you removed earlier.
Note:
Make sure to use only the tested and qualified PCI Express
x16 graphics cards listed above. Other graphics cards manu-
fac tured by o ther vend ors m ay no t be suitable for this
motherboard.
PDF 文件使用 "pdfFactory" 试用版本创建 ³ ³ www.fineprint.com.cn