Foxconn 6627MA-RS2H User Manual
Page 23
Chapter 2 Installation Instructions
16
IrDA Connector: IR (optional)
This header supports wireless transmitting and
receiving device. Before using this function, con-
figure the settings of IR Mode from the
“Integrated
Peripherals
” section of the CMOS Setup.
S/PDIF Out Connector: SPDIF_OUT
The S/PDIF out connector is capable of provid-
ing digital audio to external speakers or com-
pressed AC3 data to an external Dolby digital
decoder.
Note:The empty pin of S/PDIF cable should be
aligned to empty pin of S/PDIF out connector.
1394 Connector: F_1394 (optional)
The 1394 expansion cable can be connected to
either the front (provided the the front panel of
your chassis is equipped with the appropriate
interface) or real panel of the chassis.
IR
1
+5V
GND
IRRX
I RTX
E mpt y
SPDIF_OUT
1
+5 V
GND
Empty
S P D I F _ O UT
1
2
GND
+12V
TPB -
GND
TPA -
+12V
TPB +
GND
TPA +
Empty
F_1394
9
10
PDF 文件使用 "pdfFactory" 试用版本创建