Out of the box – Freeplay Energy Zipcharge User Manual
Page 6
8
5
CHARGING THE ZIPCHARGE™ POWER
STICK IN THE DOCKING STATION
1.
dock.
2. Connect the power supply to the back of the dock and to a
mains or wall outlet and switch the outlet on.
3. Leave to charge, full charge of the ZipCharge™ is achieved
after 15 minutes. The ZipCharge™ is fully charged when the
blue dock LED changes from a solid blue light to a flashing
blue light, Just 10 minute’s mains/wall charging will provide
more than 60% full ZipCharge™ battery capacity and is
enough to charge most mobile phones.
5. Disconnect the power supply and release the ZipCharge™
stick from the docking station which is now ready for use, to
view the ZipCharge™ internal battery charge level press
and hold the ON/OFF button. The charge is indicated by one
to three blue LEDs, three LEDs indicate that the
ZipCharge™ stick is fully charged.
Place the ZipCharge™ power stick in the ZipCharge™
OUT OF THE BOX
1 x ZipCharge™
1 x ZipCharge™ Dock
1 x Quick Start User Guide
1 x Mains power supply
1 x USB patch Cable
Tips for
Mini USB
iPhone and iPOD
Blackberry
Nokia
Samsung
Sony Ericsson
HTC
Motorola
© 2009 Freeplay Energy
For more information visit www.freeplayenergy.com
. All rights reserved. ZipCharge™ is a trademark of Freeplay Energy UK Ltd.
© 2009 Freeplay Energy
For more information visit www.freeplayenergy.com
. All rights reserved. ZipCharge™ is a trademark of Freeplay Energy UK Ltd.