Freeplay Energy Summit - Manual (Page 6)

Storing radio stations
The SUMMIT can store up to 30 radio stations (10 stations each for FM and MW –
five stations each for LW and SW2). Begin by tuning to a desired radio station as
described in Radio Operation. Press the memory button (MEM) once, then press one
of the preset buttons, ie. 1-5. The waveband, the frequency and the preset number of
the stored station are displayed and a beep sound is heard to confirm the memory set
has been stored. To store more than 5 stations per waveband, press +5 before
assigning a station to a preset button (1-5).
Listening to a preset radio station
Press the power button to switch the radio on. Press a preset button (1-5). Should you
wish to listen to a preset station above 5, first press +5 and then the number of the
desired preset. A beep sound is heard and the radio starts playing. The waveband,
the frequency and the preset number of the stored station are displayed.
Alarm time setting
Hold the ALARM SET button down while simultaneously pressing SCAN or SCAN
to set the desired alarm time. Release the ALARM SET button. The display will change
back to the current time mode. Press the ALARM SET button once to check the alarm
time set.
Alarm clock activation and deactivation
Begin by pressing the ALARM button to activate the alarm
clock. An alarm symbol will be displayed on the LCD
screen. Press the ALARM button again to deactivate the
alarm clock. Once the alarm symbol disappears, the alarm
has been deactivated. When the set alarm time comes, the
buzzer sounds and the alarm symbol on the display flashes.
Please note: you can switch the alarm off for 24 hours
by pressing the ALARM button twice. If no key is pressed during the alarm call,
the alarm clock will automatically switch off after one hour.
The SUMMIT multiband radio has a built-in sleep timer which automatically switches
the radio off after a desired period of time. You can select either the 10, 20, 30, 40,
50 or 60 minute options by holding down the SLEEP button, at which point the sleep
time counts up at 10 minutes per step, repeatedly until the desired sleep time is
shown. SLEEP and the desired time are displayed, thereafter changing to SLEEP, the
frequency and waveband of the current radio station. After the selected sleep time
has elapsed, the radio will switch off. Should you wish to deactivate the sleep timer
before the chosen time has passed, press the power button. Press the SLEEP button
once to check the remaining sleep time.
During the alarm call, the SNOOZE button can be pressed, switching the alarm call
off. After nine minutes have elapsed, the alarm will resume. Pressing the SNOOZE
Setting the Alarm
Bediening
52 7
Preset Stations
Alarm Function
Other Functions
17 16 15 18
21
22
20 Handvat kan zowel kloksgewys
als anti-kloksgewys
opgewonden worden
19 Zwaai het handvat uit om
op te winden
20
19
22 Invoer DC
21 Fitting voor hoofdtelefoon
16
17
Zonnepaneel
Handvat opwindmechanisme
18 Antenne
15 Aanduiding oplaadniveau
en ladingslichtje
Updated 506-IB-DEL 3/6/03 10:16 am Page 6