Autostick - if equipped, Operation, Autostick௡ — if equipped – Dodge 2009 Avenger User Manual

Page 278

Advertising
background image

In the event that the problem has been momentary, the
transaxle can be reset to regain all forward gears.

1. Stop the vehicle.

2. Shift into PARK.

3. Turn the ignition OFF, and then restart the engine.

4. Shift into the desired gear range and resume driving.

NOTE:

Even if the transaxle can be reset, it is recom-

mended that you visit a dealer at your earliest possible
convenience. Your dealer has diagnostic equipment to
determine if the problem could recur.

If the transaxle cannot be reset, dealer service is required.

AUTOSTICK

— IF EQUIPPED

AutoStick

௡ is a driver-interactive transaxle that offers six

manual ratio changes to provide you with more control.
AutoStick

௡ allows you to maximize engine braking,

eliminate undesirable upshifts and downshifts, and im-
prove overall vehicle performance. This system can also
provide you with more control during passing, city
driving, cold slippery conditions, mountain driving,
trailer towing, and many other situations.

Operation

By placing the shift lever one shift-level below the DRIVE
position, it can be moved from side to side. This allows
the driver to select a higher or lower range of gears.
Moving the shift lever to the Left (-) triggers a downshift
and to the Right (+) an upshift. The gear position will
display in the instrument cluster on the transaxle range
indicator.

276

STARTING AND OPERATING

Advertising
This manual is related to the following products: