High beam/low beam select switch – Dodge 2009 Avenger User Manual

Page 141

Advertising
background image

If either light remains on and does not flash, or there is a
very fast flash rate, check for a defective outside light
bulb. If an indicator fails to light when the lever is
moved, it would suggest that the fuse or indicator bulb is
defective.

Turn Signal Auto-Mode
You can signal a lane change by moving the lever
partially upward or downward without moving beyond
the detent. The turn signal will automatically flash three
times, regardless of how long the lever is held.

High Beam/Low Beam Select Switch

Push the multifunction lever away from you to switch
the headlights to high beam. Pull the lever toward you, to
switch the headlights back to low beam.

High Beam/Low Beam Select

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

139

3

Advertising
This manual is related to the following products: