Headlight, Bulb replacement – Dodge 2009 Avenger User Manual
Page 412
Advertising
![background image](/manuals/76875/412/background.png)
BULB REPLACEMENT
Headlight
1. Raise the hood and locate the connector behind the
headlamp.
NOTE:
It may be necessary to remove the air cleaner
filter housing and position the totally integrated power
module aside prior to replacing the low beam headlight
on the driver’s side of the vehicle.
2. Reach into engine compartment and from behind the
lamp assembly and grasp the connector.
410
MAINTAINING YOUR VEHICLE
Advertising
This manual is related to the following products: