Equipment placement – FSR BMS-1032 User Manual
Page 6
FSR
Installation and Operating Manual
Background Music System (BMS 1032)
www.fsrinc.com
3-1
EQUIPMENT PLACEMENT
The main BMS unit should be mounted in the rack if the particular installation has one, otherwise place
this BMS unit on a shelf or table. This unit must be accessible to the various program inputs, as well as
the paging system.
All Cat 5 cables are run from this BMS unit to the individual wall plates located in the various rooms or
locations.
The included wall mount power supply mounts in the rear of the rack (if the unit was rack mounted), or it
should be located close to the shelf or table location.
The wall plates mount in a standard 2 gang electrical box (min. depth 3 inches) and are connected to the
cable already pulled. Refer to the section on wall plates to determine proper hook-up.