Troubleshooting, N° problem problem possible cause / measure – Fulgor Milano FWC 4524 TC User Manual

Page 30

Advertising
background image

30

GB

TROUBLESHOOTING

If you feel the appliance is out of order, follow these instructions to try to see if you can solve the
problem simply by yourself before calling for service.

PROBLEM

PROBLEM POSSIBLE CAUSE / MEASURE

1

The wine cooler does not
operate

Not plugged in.
The awwwppliance is turned off.
The circuit breaker tripped or a blown fuse.

2

The wine cooler is not cold
enough

Check the temperature control setting.
External environment may require a higher setting.
The door is opened too frequently.
The door is not closed completely.
The door gasket does not seal properly.

3

Automatically turn-on and
turn-off frequently

The room temperature is hotter than normal.
A large amount of contents has been added to the wine
cooler.
The door is opened too frequently.
The door is not closed completely.
The temperature control is not set correctly.
The door gasket does not seal properly.

4

The lighting does not work

Not plugged in.
The circuit breaker tripped or a blown fuse.
The lighting is turned off.

5

Too much vibration

Check to assure that the appliance is level.
Check to assure no parts inside the cabinet or in the
compressor chamber are loose.

6

The wine cooler seems to
make too much noise

The rattling noise may come from the flow of the
refrigerant, which is normal.
As each cycle ends, you may hear gurgling sounds
caused by the flow of refrigerant.
Contraction and expansion of the inside walls may
cause popping and crackling noises.
The appliance is not level.

7

The door will not close
properly.

The wine cooler is not level.
The door was reversed and not properly installed.
The gasket is dirty.
The shelves are out of position.

8

The display window is shown
with “HH” or “LL” instead of
a digital figure, and/or with
continuous buzz sound.

The temperature probe is out of order.

Advertising