Fulgor Milano CHDD 9010 RC X - Manual (Page 14)

11
ELEKTRA CONTROL FUNCTIONS
PLEASE NOTE : THE SUCTION OF THE DOWNDRAFT CAN BE STARTED ONLY WHEN THE
DOWNDRFT IS COMPLETLY EXTRACTED.
BUTTON “A”
With suction motor turned on, every time the button is pressed
the motor speed will be reduced of one step.
BUTTON “B”
With the downdraft completely removed, the suction motor can
be turned on and/or off.
While pressing the button long enough, the suction motor turns
off automatically.
The activation of the timer is signaled by the blue flashing led
and the suction motor turns off after 10 minutes.
BUTTON “C”
With suction motor turned on, every time the button is pressed
the motor speed will be increased of one step.
BUTTON "D"
By pressing the button once, the downdraft is completely
extracted.
If the button is pressed while the downdraft is moving, the
downdraft automatically stops.
To restart the movement, it is necessary to press button "D" or
"E".
BUTTON “E”
By pressing the button once, the downdraft returns in
completely.
If the button is pressed while the downdraft is moving, the
downdraft automatically stops.
To restart the movement, it is necessary to press button "D" or
"E".
If the button is pressed when the suction motor is on, the motor
automatically turns off.
NOTES:
- At first use it is necessary to start the
remote control learning.
When the downdraft is turned off, keep
button "F" pressed for a long time.
The remote control learning is indicated
with the flashing led.
If, within one minute there is a valid remote
control code (sent by pressing any button
of the remote control), the led will be on
continuously for 3 seconds and then it will turn off, indicating the proper learning.
USE AND MAINTENANCE
Before beginning any sort of cleaning and maintenance work, turn off the power of the downdraft by
turning the main switch to 0 (OFF).
Cleaning the metal filters
The metal filters fitted in the downdraft should be washed every 2-3 months depending on how much
they are used, using hot water and a non aggressive liquid detergent.
To access the metal filters, you must open the cover from the downdraft. In order to open the cover,
F