Fulgor Milano CHDD 9010 RC X - Manual (Page 15)

12
take the cover out from the downdraft and open the cover lifting it upwards. (Fig.A)
The metal filters can be removed using the special handle unhooking first the filter in the front part
and pulling up. (Fig.B)
After washing the filters, they must be thoroughly dried and reassembled correctly.
Carbon filters
If the downdraft is used with the internal recycle filtering system, then
active carbon filters must be used.
The active carbon in the filters traps the cooking smells.
Warning: The carbon filters can not be reused or washed and should
be changed periodically (every 4 months if the hood is used for two
hours every day). Saturated filters cause fire hazards.
The carbon filters are placed underneath the metal filters.
Cleaning the hood
If the downdraft is stainless steel, use specific products and rags for satin stainless steel (non-
abrasive and / or corrosive detergents free of chlorine), ensuring to clean in the same direction as
the satin finish.
Do not use aggressive products, chemical solvents or derivatives of oil distillates that could leave oily
traces which could cause oxidation and polymerization.
The manufacturer is not responsible for damage to the surface of the downdraft due to failure
to respect these instructions.
Fig. A Fig. B