Fulgor Milano FDW9017 - Manual (Page 39)

SELECTING OPTIONS
If you do not want to select any more options, press the Programme selector to exit the options menu.
P R O G
Description
This option activates both spray arms and enables you to wash both
the upper and lower baskets. This option can be used with all pro-
grammes except Lower half wash, Upper half wash, Mixed wash and
Crockery warming.
Full load
Loading the baskets
You can use this option if you only have cups and glasses that need
washing in the upper basket. This option can be used with all pro-
grammes except Lower half wash, Upper half wash, Mixed wash and
Crockery warming. Upper half load
You can use this option when you only want to wash plates and cutlery
in the lower basket. This option can be used with all programmes
except Lower half wash, Upper half wash, Mixed wash and Crockery
warming.
Lower half load
When you select Delayed start (24Start), the dishwasher will start
30 minutes to 24 hours after you press the Start/Stop button. 1
is shown on the display. Press the but-
ton to set the desired start time.
2 Press the Start/Stop button or select fur-
ther options. The dishwasher now counts
down the time every minute until the
programme starts. Then the remaining
programme time appears on the display.
Delayed start
(24Start)
Press and hold Start/Stop for three seconds if you want to cancel the
Delayed start (24Start) option.
With this option, you can choose the temperature used in the main
wash. Select a high temperature if you want to improve dishwashing
efficiency. You can choose a temperature from cold to 70 °C with
all programmes except Delicate wash (from cold to 60 °C) and Plastic
wash (from cold to 65 °C). The number of available temperatures
is reduced if the Time saver option is activated. Press to choose the temperature used in the
main wash. Temperature
This option can be used with all programmes except Auto wash
(iWash), Time program, Rinse & Dry, Rinse & Hold and Crockery
warming.
A higher temperature in the final rinse and a longer drying phase
improves the drying result if you select Long dry. This causes a slight
increase in energy consumption. If you want a programme without
drying, press the option button again and the symbol turns off. To
save energy, select Short dry or No dry.
Long dry
Drying
No dry
Short dry
You can select the drying performance for all programmes except
Auto wash (iWash), Time program, Rinse & Dry, Rinse & Hold and
Crockery warming.
This option shortens the programme time, but uses more energy
and water. This option can be selected with the programmes Heavy
wash, Normal wash, Mixed wash, Upper half wash and Lower half
wash. Off Time saver
On
11