Fusion PP-FR6920 - Manual

POWERPLANT
FULL RANGE SPEAKERS
PP-FR52520, PP-FR6520, PP-FR5720, PP-FR6920
Speaker Parameters
Installation
Before any wiring and installation is performed, FUSION recommends you first plan the complete installation process. Look
at the wiring routing, speaker location, and fitment. Make sure you recheck the installation at completion.
A correct front stage and stereo image can be achieved by proper speaker placement. Ideally, speakers need to be posi-
tioned where the sound produced is directed at the occupants of the vehicle. The adjustable tweeter on FUSION Power-
Plant Full Range speakers is designed to make this easier.
Fusion speakers have been designed to fit in many stock or factory positions in the vehicle FUSION recommends a location
with sufficient air volume behind the speaker, for it to work within its frequency range.
Installation Warning
1. Ensure the vehicle 12 volt lead is removed from the battery before any equipment is connected.
2. Investigate the vehicle gas tanks, brake lines, and electrical wiring locations before you begin installation.
3. Attach the product securely to the vehicle to prevent damage in the event of an accident.
4. Ensure all wiring is protected to avoid damage or pinching of the cables.
Installation Guidelines
1. Ensure there is adequate clearance and depth for the speaker to be mounted
2. Use the supplied template to mark out the correct diameter hole
3. Drill four holes for the mounting screws
4. Carefully study the mounting diagram before attempting to mount the speaker. Insert the speaker and grille frame
and affix with the screws provided. Your PowerPlant speaker is provided with two choices of grille frame. The cus-
tom grille is screwed directly into the frame of the speaker (see diagram B on reverse side). For the mesh grille, first
remove the mesh, then fit the speaker and screw the grille into place. The mesh is fitted last by simply pushing the
tabs on the mesh into the self-locking slots in the grille frame. (see diagram A on reverse side).
5. Your PowerPlant full range speaker, features a unique new method of adjusting the listening angle of the tweeter,
and it can be angled 15 degrees in any direction. Set the tweeter so that it faces, as near as possible, toward your
ear. This will provide the clearest high frequency sound you can get. Once adjusted, the unique design of the tweeter
ensures it will always stay in this position.
PP-FR52520 PP-FR6520 PP-FR5720 PP-FR6920
Max Power Rating 160 Watts 240 Watts 200 Watts 280 Watts
RMS Power Rating 70 Watts 110 Watts 85 Watts 120 Watts
Frequency Response 60Hz - 22kHz 55Hz - 22kHz 60Hz - 22kHz 45Hz - 22kHz
Impedance 4 Ohms 4 Ohms 4 Ohms 4 Ohms
Sensitivity 88 dB 91 dB 90 dB 92 dB
Mounting Depth 60 mm 65 mm 63mm 84mm
Mounting Diameter 125 mm 140 mm 185mm x
130mm 227 mm x
158 mm