GAMMA 6900 Els STRINGING MACHINE 2 POINT SC MOUNTING (Issue 4B - February 2014) - Manual (Page 5)

6
Floor Stand Assembly
The stringing machine uses a four leg
fl oor stand design. The legs must be as-
sembled to the lower column before use.
Remove all parts from the shipping carton
to confi rm that contents match the list of
parts on Page 5.
ASSEMBLY INSTRUCTIONS
Floor Stand Leg Assembly
Align the holes in the leg fl ange with
the matching holes in the lower column.
Secure the leg with one M8 FLAT HEAD
screw through the upper hole, and one
M8 SOCKET HEAD cap screw through
the bottom hole. Install one 8mm nut on
each screw. Repeat this procedure for the
three remaining legs.
Floor Stand Assembly (Continued.)
To complete the fl oor stand, screw the height adjust-
ment locking knob (“A”) into the side of the lower
column. The locking knob should not protrude beyond
the inside surface of the lower column at this time.