GAMMA 5800 Els STRINGING MACHINE 2 POINT SC MOUNTING (Issue 1 - June 2006) - Manual (Page 6)

ASSEMBLY INSTRUCTIONS
5
Height Adjustment
The height of the machine is adjustable from
39” to 46”. To change the height, remove the
socket head cap screw from its current posi-
tion and place it in the appropriate hole to set
the desired height of the machine.
Stand Upper Post Installation (cont.)
Secure the flange to the base with the six cap
screws or the rubber feet.
USE CAUTION WHEN SECURING
SCREWS TO SLIDING BRACKETS, THEY
WILL STRIP.
Stand Upper Post Installation
With the height adjustment cap screw on the
upper post facing the brake lever & string
length meter, align the 6 holes marked “X” in
the upper post flange with the holes in the
slide brackets of the machine base.