Genee World GV-3100 - Manual (Page 8)

5
Switching projector inputs
By linking your visualiser to a PC
or laptop you can switch projector
inputs using the ‘CAM/PC’ button
on the unit’s remote. This integrates
seamlessly with an interactive
whiteboard and only requires a
second VGA lead:
(you may have to clone the screen
when linked to a laptop).
If your PC is connected to a splitter box, simply connect the
VGA lead that comes from the wall-plate socket into the
visualiser’s ‘Projector’ socket, then use another VGA lead to
link the splitter box to the visualiser’s ‘Computer In’ socket.
(The visualiser itself can be used as a splitter box!).
The GV3100 records directly to an SD Card which can be
transferred to any PC / Laptop with an SD card reader.
‘RGB in’
socket
‘Projector’
socket
CAM/PC
button
‘12V IN’
socket
‘Computer
in’ socket
Projector
Laptop / PC
VGA lead
(direct to projector,
screen or wall plate
socket)