Onnect the, Amera to network with, Dhcp – Grandstream GXV3610 2 Series Mounting Installation Guide User Manual
Page 13: Server, Ecommended
Grandstream Networks, Inc.
GXV3610_HD/FHD Mounting and Installation Guide
Page 13 of 14
Last Updated: 10/2013
Connect the Camera to network with DHCP server (Recommended)
The GXV3610_HD/FHD by default enabled as DHCP client, it will automatically get IP address from the
network with DHCP server running. User can know the IP address assigned to the camera from DHCP
server log or using the Grandstream GS_Search tool.
1. Download the GS_Search tool from Grandstream website:
2. Run the Grandstream GS_Search tool by double click the unzipped “GS_Search.exe”.
3. Click on the “Search” button to begin device detection
4. The detected devices will appear in the output field like below
5. Double click the column of the detected camera, the browser will automatically open and link to the
device IP and the web configuration page.
6. The browser will ask for plug-in or ActiveX if not installed, otherwise it will get to Home page and
start to show the video captured by the camera (by default the camera enabled anonymous access)
7. Click “Configuration”, the browser will ask credentials to authorize configuration.
8. Enter the administrator user name and password to access the Web Configuration Interface, the default
user name and password are both set to admin.
9. In step 6, browser will indicate that “This website wants to install the following add-on:
GSViewerX.cab from Grandstream Networks Inc.”, allow the installation.
10. The plug-in can be download here:
NOTE:
Please temporarily disable Antivirus or Internet Security Software and close all browsers when
download and install the Grandstream Plug-in Software.