Grandstream GXV3240 Administration Guide - Manual (Page 23)

Firmware Version 1.0.3.37 GXV3240 Administration Guide Page 21 of 117
Reboot Reboot the phone.
OPEN LCD SETTINGS

Go to LCD onscreen MENU and then tap on Settings;
Or

On GXV3240 idle screen, press MENU button and then tap on System settings.
PERSONALIZED ACCOUNT
In this menu, all the six SIP accounts will show up with registration status displayed. Tap to select the SIP
account to configure ring tone, auto answer, shared call appearance and call forwarding settings.

Ringtone
Select ring tone for the incoming call to this SIP account. If "Custom Ringtone" is selected, File Manager
will be opened for users to choose their own music file to be configured as the incoming call ring tone.
Users will see the music file name as the ring tone name in account ring tone settings in LCD as well
as in web GUI.

Auto-Answer
 If set to "Always", the phone will automatically turn on the speaker phone to answer all incoming
calls.
 If set to "Enable Intercom/Paging", the phone will answer the call based on the SIP info header sent
from the server/proxy.
 By default, it's turned off.

Shared Call Appearance (SCA)
 Shared Call Appearance (SCA): Enable or disable SCA on the account.
 Enable Barge-in: If set to "Yes", the user could barge into an active call on a shared line.
 Auto Fill Call Park Code: If set to "Yes", the configured "Call Park Service Code" will be
automatically filled in on the phone's dial pad when picking up the parked call. This is used when
"Special Mode" is set to "Broadsoft" (from web UI or provisioning) and "Enable SCA" is set to "Yes".

Call Park Service Code: Configure the pickup feature code for call parking. If "Auto Fill Call Park
Code" is set to "Yes", this call park service code will be automatically filled in on the phone's dial