Grandstream GXW400x User Manual - Manual (Page 32)

FIRMWARE VERSION 1.0.14.1 GXW400X USER MANUAL Page 30 of 60

G726 (16/24/32/40)

iLBC

AAL2 (all G726)
D EFINITIONS
This section will describe the options in the Web configuration user interface. As mentioned, a user can
log in as an administrator or end-user.
Functions available for the end-user are:

STATUS: Displays the network status, account status, software version and MAC-address of the
phone

BASIC SETTINGS: Basic preferences such as date and time settings, multi-purpose keys and
LCD settings can be set here.
Additional functions available to administrators are:

ADVANCED SETTINGS: To set advanced network settings, codec settings and XML
configuration settings.

PROFILE X: To configure each of the SIP accounts.

FXS PORTS: To configure each of the FXS ports and Hunting Groups etc.
TABLE 7: BASIC SETTINGS
End User Password Password to access the Web Configuration Menu. This field is case sensitive with a
maximum length of 25 characters.
Web Port By default, HTTP uses port 80. This field is for customizable web port.
Telnet Server Default is Yes.
IP Address There are two modes to operate the GXW400X :
DHCP mode: The GXW400X acquires its IP address from the first DHCP server it
discovers from the LAN It is on.
PPPoE: Set the PPPoE account settings. The GXW400X will establish a PPPoE
session if any of the PPPoE fields is set.
Static IP mode: configure the IP address, Subnet Mask, Default Router IP address,
DNS Server 1 (primary), DNS Server 2 (secondary) fields. These fields are set to
zero by default.