Grandstream GXW400x User Manual - Manual (Page 38)

FIRMWARE VERSION 1.0.14.1 GXW400X USER MANUAL Page 36 of 60
Via HTTP or HTTPS Server The URL for the HTTP server used for firmware upgrade and configuration via HTTP.
Note: If Auto Upgrade is set to No, GXW400X will only do HTTP download once at
boot up.
Firmware Server Path IP address or domain name of firmware server. That URL of the server that hosts the
firmware release. The default server is: fm.grandstream.com/gs
Config Server Path IP address or domain name of configuration server. The server hosts a copy of the
configuration file to be installed on the gateway. The default server is:
fm.grandstream.com/gs
XML Config File Password The password used for encrypting the XML configuration file using OpenSSL.
This is required for the phone to decrypt the encrypted XML configuration file.
HTTP/HTTPS User Name The user name needed to authenticate withthe HTTP/HTTPS server.
HTTP/HTTPS Password The password needed to authenticate with the HTTP/HTTPS server.
Always send HTTP Basic
Authentication Information Default is Send HTTP Basic Authentication Information only when challenged. If
set to Always, device will send configured user name and password within HTTP
request without server sending authentication challenge.
Firmware File Prefix This field enables user to store different versions of firmware files in one single
directory on the firmware server. If configured, only the firmware file with the
matching prefix will be downloaded.
Firmware File Postfix This field enables user to store different versions of firmware files in one single
directory on the firmware server. If configured, only the firmware file with the
matching postfix will be downloaded.
Config File Prefix This field enables user to store different configuration files in one single directory on
the configuration server. If configured, only the configuration file with the matching
prefix will be downloaded.
Config File Postfix This field enables user to store different configuration files in one single directory on
the configuration server. If configured, only the configuration file with the matching
postfix will be downloaded.
Allow DHCP Option 66 or
160 to override server
If set to “Yes”, configuration and upgrade server information can be obtained using
DHCP option 66 or option 160 from DHCP server located in customer’s environment.
Note: If DHCP Option 66 is enabled, the gateway will attempt downloading a
configuration file from the server URL provided by DHCP, even though Config
Server Path is left blank.