Figure 9: telnet connection to ami using tls, Figure 10: user authentication successful – Grandstream UCM6100 Asterisk Manager Interface (AMI) Guide User Manual
Page 12
UCM6100 Asterisk Manager Interface (AMI) Guide Page 11 of 14
Figure 9: Telnet Connection to AMI Using TLS
The IP address is the UCM6100 IP and 5039 is the TLS port.
3.4. After the connection is established, the system
will wait for user’s input. By default, if there is no input
in 30 seconds, the system will disconnect automatically.
3.5. To log in and get authenticated, manually enter all the text below:
action: login
username: ucmamiuser1
secret: admin1234
Tap on ENTER and users should see response like below. Sometimes if there is no response after
ENTER, please tap on ENTER again.
Figure 10: User Authentication Successful
3.6. To view all executable AMI command, enter text below:
action: listcommands
Tap on ENTER. Users will see the following output. The highlighted command is corresponding to