Grip Factory Munich GF-Quad Dolly - Manual (Page 11)

- 10 -
When assembling the track or skateboard wheels it is easier to recognize the rotation
restrictor on the track wheel axles. To mount the track wheels proceed as follows:
Insert the track wheel shaft into the shaft connector on the track wheel
unit, checking that the safety pin is inserted fully. Tip: when the pin slips
into place is makes an audible click!
Mounting the track wheels
Disassembly:
To remove the wheels, release the locking pin by pulling it away from
the axle connection. At the same time remove the respective wheel
axle.
Removing the track wheel
Track wheel
shaft
Track wheel axle Track wheel
shaft connector