Datalogic Scanning Skorpio-GUN User Manual
Page 26
DATALOGIC SKORPIO™/ SKORPIO-GUN™
1
2. Remove the Mini SD card slot’s protective rubber cover.
3. Insert the card with the written part upward (as shown in the figure) and
push it in, aided by the stylus, until it clicks into place.
To recognize the card simply turn off and turn on the Datalogic Skorpio™.
See par. 3.4.
To remove the Mini SD card, just push it toward the inside, aided by the
stylus, until it clicks; a spring system will return it out.
CAUTION
Follow proper ESD precautions to avoid damaging the SD. Proper ESD
precautions include, but are not limited to, working on an ESD mat and
ensuring that the operator is properly grounded.
Do not force the card. If you feel resistance, remove the card, check
the orientation, and reinsert it.
Do not use the SD card slot for any other accessories.
6