Datalogic Scanning Skorpio-GUN - Manual (Page 68)

DATALOGIC SKORPIO™/ SKORPIO-GUN™
3
3.8.3 Bluetooth ® Manager Device Setup
In order to enable a Bluetooth
® device for communication with the Datalogic
Skorpio™ you must perform the discovery procedure and enable the device as
follows:
1. Place the Bluetooth ® device within the range of the Datalogic Skorpio™ (10
meters).
2. From the “Control Panel” main window double tap on the “Bluetooth” applet to
open the Bluetooth ® Manager Device window:
3. Tap on the “Me” button to enter the related window; then, tap on the “ON” button
to activate the Bluetooth ® module. The module activation may be also performed
by using the WIRELESS COMMUNICATION applet as described in par. 3.7.4.
48