Guntermann & Drunck DVICenter DP16 Configuration and Operation - Manual (Page 68)

Target modules
60 · G&D DVICenter
Access to USB devices
In the defaults of the matrix system, users have access to USB devices of a channel
group.
This right can be denied by changing the right »Access to USB devices« of a user
account or a user group.
The right to access USB devices of a certain target computer can be denied either
globally (for all target computers a user or a user group can access) or for certain tar-
get computers or groups.
How to change the right to access USB devices for all target computers:
1. Press the Ctrl+Num (default) hotkey to open the on-screen display.
2. Press F11 to call the Configuration menu.
3. If you want to change this right of a user account, select the User entry.
For changing the right of a user group, select the Usergroup entry.
4. Press Enter .
5. Select the user account or the user group whose multi access rights you want to
change and press F5 .
6. Select the Operation rights entry and press Enter .
7. Select the Target USB access entry and press F8 (repeatedly) to select one of
8. Click Ok to save you settings.
How to change the right to access USB devices for a certain target module or tar-
get group:
1. Press the Ctrl+Num (default) hotkey to open the on-screen display.
2. Press F11 to call the Configuration menu.
3. If you want to change this right of a user account, select the User entry.
For changing the right of a user group, select the Usergroup entry.
4. Press Enter .
NOTE: The access right depends on the user’s effective right (see page 40). The
effective right is the highest right that results from the individual right of user
accounts and the rights of assigned group(s).
yes: Allow access to USB devices of the channel group.
no: Deny access to USB devices of the channel group.
NOTE: You can configure and apply access to USB devices if the user account or
the user group are assigned with general access rights (see page 57 f.) for the target
computer.