Displaying »multiuser« information – Guntermann & Drunck DVICenter DP16 Configuration and Operation User Manual
Page 78
Target modules
70 · G&D DVICenter
How to enable/disable automatic access to the last accessed target module:
1. Press the
Ctrl+Num
(default) hotkey to open the on-screen display.
2. Press
F10
to call the Personal Profile menu.
3. Select the
Remember last target
entry and press
F8
(repeatedly) to select one of the
following settings.
4. Press
F2
to save your settings.
Displaying »Multiuser« information
If several users are accessing a target computer (Multiuser mode), the »Multiuser«
information can be activated. This way, all accessing users are provided with the
information that at least one other user is currently accessing the target computer.
How to (de)activate the »Multiuser« information for the entire system:
1. Press the
Ctrl+Num
(default) hotkey to open the on-screen display.
2. Press
F11
to call the
Configuration
menu.
3. Select the
System
entry and press
Enter
.
4. Select the
Multiuser display
entry and press
F8
to select one of the following options:
5. Press
F2
to save your settings.
How to (de)activate the »Multiuser« information for a particular user account:
1. Press the
Ctrl+Num
(default) hotkey to open the on-screen display.
2. Press
F10
to call the Personal Profile menu.
IMPORTANT:
When enabling the
Remember last target
function, the user’s
configured standard targer is ignored.
yes:
After the user logs in, the remembered target is accessed.
no:
After the user logs in, the configured standard target is accessed.
If no standard target is configured, the
Select
menu opens (default).
NOTE:
The setting to display the »Multiuser« information for the entire system are
usually carried out in the Configuration menu. This setting of the Personal Profile
menu enables you to individually configure this setting for each user account.
Both possibilities are described on this page.
yes:
activates »Multiuser« display
no:
deactivates »Multiuser« display