Guralp Systems CMG-DM24S12AMS - Manual (Page 46)

CMG-DM24S12AMS Operator's guide
To find out what software version you are currently using, right-click on
the digitiser’s icon (not the Local or the Comxx icons) in Scream!'s main
window and select Configure from the pop-up menu. This will open the
Configuration setup window.
If you are running an older version of the digitiser software, and wish to
upgrade, you should first obtain the latest software from Güralp
Systems, then proceed as follows.
In Scream!’s main window, right-click on the digitiser’s icon and select
Terminal from the pop-up menu to open a terminal window. Check that
there is two-way communication with the digitiser by pressing Enter.
The digitiser should reply with ok on a new line.
46 Issue B