Dual TS Series - Manual (Page 4)

4
TS SERIES INSTALLATION
Lighting Hook-Up Recommendations
The illuminite lighting elements of your TS series products provide you with a
unique custom touch to your vehicle. Dual’s patent pending illuminite bulb system
and control circuitry provides an extraordinary lighted-hue illumination which
allows great creative opportunities for the beginner and seasoned custom installer
alike. The interior of your vehicle will never sound or look ordinary again. Let your
imagination take you there.
The lighting features of all illuminite products require a 12 volt DC power source to
operate. The speaker has two distinct sets of input terminals. The first is labeled
audio input terminals and the second is labeled illuminite lighting inputs. The inputs
are clearly marked with a label positioned directly above the terminal housing. The
polarity (+ and -) indicators for each set of inputs also appear on these labels.
1. Do not connect amplifier or any audio source to illuminite lighting inputs. Inputs
are designed for switched 12 volt DC power source only.
2. See fig. 1a, (illustrated wiring diagram) be sure to maintain polarity. Be sure to
connect to a switched 12 volt DC source. Correct connection would be the positive
(+) 12 volt wire to the Positive (+) illuminite Lighting input terminal and connect the
Negative (-) illuminite lighting input terminal to a good chassis ground.
Notice: The illuminite series LED illumination elements are not removable. There
are no serviceable parts inside or attached to the speaker assembly. The illuminite
series products are sensitive electronic devices. Removal or tampering with any part
or portion of the speaker and/or its assemblies will damage the product and void the
limited warranty.
Fig 1a
Audio Input
Terminals Illuminite Lighting
Input Terminals
Lighting Hook-Up From Rear
Audio
12 Volt Source
Ground
Source