Harken C7475 MKIII Jib Reefing & Furling - Manual (Page 7)

Use Super Bonder to glue the trim cap to the roughened
foil top.
Slide the next connector to the top of the stay.
Coat half of the connector and the indentation with
red Loctite ® .
Place a plastic connector wedge in the indentation
closest to the top foil.
Coat foil screws with red Loctite. Screw them into the
connector until tight. Continue assembly.
Slide halyard swivel onto foil, tall end up.
ASSEMBLY Foils
December 2004 Nautor Furling 7