Harken C7475 MKIII Jib Reefing & Furling - Manual (Page 9)

Hammer the pin into the main body.
Clean excess Loctite
® from the terminal body. Tape around
sleeve to secure pin.
Lower drum assembly and slip clevis pin and cotter pin
in place.
Coat threads of torque tube screws with blue Loctite ® .
Raise foils and insert foil screws.
Check the clearance between the top of the foil and top
terminal.
TIP: Check clearance when the unit is on the ground,
before raising the headstay into position.
ASSEMBLY Attach Stay
ASSEMBLY Foil Length
December 2004 Nautor Furling 9